علیرضا ایوانی

  رتبه علمی: استادیار

  محل تحصیل: دانشگاه صنعتی دلفت هلند

  آخرین مدرک تحصیلی: دکتری

  سال اخذ مدرک تحصیلی: 1389

  پست الکترونیکی: aeivani@iust.ac.ir

Vafaeenezhad, H., Seyedein, S.H., Aboutalebi, M.R., Eivani, A.R, "Incorporating the Johnson–Cook Constitutive Model and a Soft Computational Approach for Predicting the High-Temperature Flow Behavior of Sn-5Sb Solder Alloy: A Comparative Studyfor Processing Map Development", Journal of Electronic Materials, 8 September 2016, Pages 1-11

Torabi, M., Eivani, A.R.AWT IMAGE , Jafarian, H., Salehi, M.T. , "Die Design Modification to Improve Workability during Equal Channel Angular Pressing", Advanced Engineering Materials, Volume 18, Issue 8, 1 August 2016, Pages 1469-1477

Karami, S., Jafarian, H.AWT IMAGE , Eivani, A.R., Kheirandish, S.Engineering tensile properties by controlling welding parameters and microstructure in a mild steel processed by friction stir welding", Materials Science and Engineering A, Volume 670, 18 July 2016, Pages 68-74 "

Eivani, A.R., Zhou, J., Duszczyk, J., "Mechanism of the formation of peripheral coarse grain structure in hot extrusion of Al-4.5Zn-1Mg", Philosophical Magazine, 17 March 2016, Pages 1-9

M.S. Shadabroo, A.R. Eivani, H.R. Jafarian, S.F. Razavi, J.Zhou, "Optimization of interpass annealing and further grain refinment via equal channel angular pressing in AA6063 alloy", Materials Characterization, Accepted for publication (2016).

A.H. Omranpour, A.R. Eivani, "Grains versus subgrains: how growth kinetics is affected by the presence of nanosized dispersoids", Solid state communicaions, Accepted for publication (2016).

Sh. Valipour, A.R. Eivani, H.R. Jafarian, M.R. Aboutalebi, S.H. Seyedein, "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angula r extrusion", Materials and Design, 89 (2016) 377–384.

Noor, S.V., Eivani, A.R., Jafarian, H.R., Mirzaei, M., "Inhomogeneity in microstructure and mechanical properties during twist extrusion", Materials Science and Engineering A, Volume 652, January 15, 2016, Pages 186-191

Valipour, S., Eivani, A.R.AWT IMAGE , Jafarian, H.R., Seyedein, S.H., Aboutalebi, M.R., "Effect of pre-deformation thermomechanical processing on the development of ultrafine grain structure during equal channel angular extrusion", Materials and DesignVolume 89, January 05, 2016, Pages 377-384

 S. Ghanei, H. Vafaeenezhad, M. Kashefi, A.R. Eivani, M. Mazinani, "Design of an expert system based on neuro-fuzzy inference analyzer for on-line microstructural characterization using magnetic NDT method", Journal o f Magnetism and Magnetic Materials, Vol. 379, pp. 131-136.

 S.M. Ashrafizadeh, A.R. Eivani, "Correlative evolution of microstructure, particle dissolution, hardness and strength of ultrafine grained AA6063 alloy during annealing", Materials Science and Engineering A, vol. 644, pp. 284-296, Sep. 2015.

F. Rahimi, A.R. Eivani, M. Kiani, "Effect of die design parameters on deformation behavior in pure shear extrusion", Materials and Design, vol. 83, pp. 144–153, Oct. 2015

F. Rahimi, A.R. Eivani, "A new sever plastic deformation technique based on pure shear", Materials Science and Engineering A, Volume 626, 25, 2015, pp. 423-431

A.R. Eivani, "Towards bulk nanostructured materials in pure shear", Materials Letters, Volume 139, 15 January 2015, Pages 15-18.

Fesahat, M., Soltanieh, M.AWT IMAGE , Eivani, A.R., "Effect of plasma nitriding on nanostructure of TRD coating", Surface EngineeringVolume 32, Issue 8, 2015, Pages 547-553

H.R. Jafarian, A.R. Eivani, "Texture development and microstructure evolution in metastable austenitic steel processed by accumulative roll bonding and subsequent annealing", Journal of Materials Science, October 2014, Volume 49, Issue 19, pp. 6570-6578.

Y. Pei, A.R. Eivani, T. Zaharia, A. Kazantis, M.C.M. van de Sanden, J.Th.M. De Hosson, "High throughput deposition of hydrogenated amorphous carbon coatings on rubber with expanding thermal plasma", Surface and Coating Technology, Volume 245, 25 April 2014, Pages 74-83.

A.R. Eivani, J. Zhou, J. Duszczyk, "Simulation of transient state recrystallization of Al-4.5Zn-1Mg alloy after hot deformation", Computational Materials Science, vol. 86, pp. 193–199, Mar. 2012.

A.R. Eivani, J. Zhou, J. Duszczyk, "Numerical modeling of subgrain growth of hot extruded Al-4.5Zn-1Mg alloy in the presence of nanosized dispersoids", Computational Materials Science, vol. 86, pp. 9–16, Mar. 2012.

J. Zhou, J. Duszczyk and A.R. Eivani, “Methods to inhibit localised recrystallization in AA7020 alloy extrusions" International Aluminum Journal, April 2013, pp. 59-64.

A.R. Eivani, S. Ahmadi, J. Zhou, and J. Duszczyk, “Subgrain growth in the presence of nano-sized dispersoids in Al-4.5Zn-1Mg alloy” Materials Science and Technology, Accepted for publication, December 2012

A.R. Eivani, J. Zhou, and J. Duszczyk, “Grain boundary vs. particle stimulated nucleation in hot deformed Al-4.5Zn-1Mg alloy” Materials Science and Technology, Volume 29, Number 5, pp. 517-528.

A.M. Rashidi, F. Mozafari, A.R. Eivani, "Prediction of thickness loss of nanocrystalline nickle at elevated temperatures", Solid State Sciences, Volume 17, March 2013, Pages 151-155.

A.R. Eivani, J. Zhou, and J. Duszczyk, “Combined physical modeling and Monte Carlo simulation of recrystallization of hot deformed AA7020 aluminum alloy” Materials Science Forum, 715-716, pp. 480–485, 2012.

A.R. Eivani, J. Zhou, and J. Duszczyk, “Role of microstructural features in defining the extrudability of 7xxx series aluminum alloys and preventing the peripheral coarse grain structure” Light Metal Age, pp. 22–30, June 2012.

A.R. Eivani, J. Zhou, and J. Duszczyk, “A new approach to incorporating the effect of nano-sized dispersoids on recrystallization inhibition into Monte Carlo simulation” Computational Materials Science, vol. 54, pp. 370–377, Mar. 2012.

A.R. Eivani, H. Ahmed, J. Zhou, J. Duszczyk, and C. Kwakernaak, “Characterisation of different types of dispersoids present in homogenised Al-4.5Zn-1Mg alloy containing Zr, Cr and Mn,” Mater. Sci. Technol., vol. 27, no. 8, pp. 1294–1298, Aug. 2011.

A.R. Eivani, S. Valipour, H. Ahmed, J. Zhou, and J. Duszczyk, “Effect of the Size Distribution of Nanoscale Dispersed Particles on the Zener Drag Pressure,” Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., vol. 42A, no. 4, pp. 1109–1116, Apr. 2011.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “Modeling the TDFD dissolution of Al-Fe-Mn-Si particles in an Al-4.5Zn-1Mg alloy,” Philos. Mag., vol. 90, no. 21, pp. 2865–2897, 2010.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “Modelling dissolution of low melting point phases during the homogenisation of AA7020 aluminium alloy,” Mater. Sci. Technol., vol. 26, no. 2, pp. 215–222, Feb. 2010.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “Optimization of the chemical composition and homogenization treatment of AA7020 aluminum alloy,” Advanced Materials Research, vol. 89–91, pp. 177–183, 2010.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “An experimental and theoretical investigation of the formation of Zr-containing dispersoids in Al–4.5Zn–1Mg aluminum alloy,” Materials Science and Engineering: A, vol. 527, no. 9, pp. 2418–2430, Apr. 2010.

M.E. Aalami-aleagha, S. Feli, and A.R. Eivani, “FEM simulation of splatting of a molten metal droplet in thermal spray coating,” Computational Materials Science, vol. 48, no. 1, pp. 65–70 , Mar. 2010.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “Evolution of Grain Boundary Phases during the Homogenization of AA7020 Aluminum Alloy,” Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., vol. 40A, no. 3, pp. 717–728, Mar. 2009.

A.R. Eivani, H. Ahmed, J. Zhou, and J. Duszczyk, “Correlation between Electrical Resistivity, Particle Dissolution, Precipitation of Dispersoids, and Recrystallization Behavior of AA7020 Aluminum Alloy,” Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., vol. 40A, no. 10, pp. 2435–2446, Oct. 2009.

A.R. Eivani, S. Ahmadi, E. Emadoddin, S. Valipour, and A. Karimi Taheri, “The effect of deformations passes on the extrusion pressure in axi-symmetric equal channel angular extrusion,” Computational Materials Science, vol. 44, no. 4, pp. 1116–1125, Feb. 2009.

P. Jajarmi and A.R. Eivani, “Modeling the electrical resistivity of Zn–Mn–S nanocrystalline semiconductors,” Computational Materials Science, vol. 46, no. 1, pp. 124–127, Jul. 2009.

A.M. Rashidi, A.R. Eivani, and A. Amadeh, “Application of artificial neural networks to predict the grain size of nano-crystalline nickel coatings,” Computational Materials Science, vol. 45, no. 2, pp. 499–504, Apr. 2009.

S. Ahmadi, A.R. Eivani, and A. Akbarzadeh, “Experimental and analytical studies on the prediction of forming limit diagrams,” Computational Materials Science, vol. 44, no. 4, pp. 1252–1257, Feb. 2009.

S. Ahmadi, A.R. Eivani, and A. Akbarzadeh, “An experimental and theoretical study on the prediction of forming limit diagrams using new BBC yield criteria and M–K analysis,” Computational Materials Science, vol. 44, no. 4, pp. 1272–1280, Feb. 2009.

A.R. Eivani and A. Karimi Taheri, “The effect of dead metal zone formation on strain and extrusion force during equal channel angular extrusion,” Computational Materials Science, vol. 42, no. 1, pp. 14–20, Mar. 2008.

A.R. Eivani and A. K. Taheri, “Effective strain based on shear and principal strains in equal channel angular extrusion with outer curved corner,” Computational Materials Science, vol. 41, no. 3, pp. 409–419, Jan. 2008.

A.R. Eivani and A. K. Taheri, “Modeling age hardening kinetics of an Al–Mg–Si–Cu aluminum alloy,” Journal of Materials Processing Technology, vol. 205, no. 1–3, pp. 388–393, Aug. 2008.

A.R. Eivani and A. Karimi Taheri, “An upper bound solution of ECAE process with outer curved corner,” Journal of Materials Processing Technology, vol. 182, no. 1–3, pp. 555–563, Feb. 2007.

A.R. Eivani and A. Karimi Taheri, “A new method for estimating strain in equal channel angular extrusion,” Journal of Materials Processing Technology, vol. 183, no. 1, pp. 148–153, Mar. 2007.

A.R. Eivani and A. K. Taheri, “A new method for producing bimetallic rods,” Materials Letters, vol. 61, no. 19–20, pp. 4110–4113, Aug. 2007.