مجیدرضا آیت اللهی
رتبه علمی: استاد
پست الکترونیکی : m.ayat AT iust.ac.ir
آدرس: دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، تهران، ایران
دانشگاه های محل تحصیل
دکترا، دانشگاه بریستول، انگلستان
کارشناسی ارشد، دانشگاه امیرکبیر، ایران
کارشناسی، دانشگاه علم و صنعت، ایران
زمینه های تحقیقاتی
مکانیک شکست
تحلیل تنش
مکانیک جامدات تجربی
جوایز علمی
• NATIONAL DISTINGUISHED PROFESSOR of the year in the Islamic Republic of Iran,
Selected by Ministry of Science, Research and Technology, Awarded by the Iranian President, 2014.
• Distinguished professor of the year in international collaborations, Iran University of Science and Technology, 2013.
• Distinguished researcher of the year, Iran University of Science and Technology, 2012.
• Distinguished professor of the year, Iran University of Science and Technology, 2011.
• Distinguished researcher of the year, Iran University of Science and Technology, 2010.
• Distinguished researcher of the year, Iran University of Science and Technology, 2009.
• Director of the Second Top Research Laboratory, Iran University of Science and Technology, 2003.
• Best Vice-Chair in Research among the University Schools, Iran University of Science and Technology, 2000.
تجربیات تخصصی
Vice Chair in Research Affairs (2000- 2008), School of Mechanical Engineering, IUST.
Member of University research council (2000-2008), Iran University of Science and Technology.
Member of committee for promotion assessment (2004-present), School of Mechanical Engineering, IUST.
Head of the Solid Mechanics educational group (2008-present), School of Mechanical Engineering, IUST.
Director of Fatigue and Fracture Research Laboratory (2001-present), School of Mechanical Engineering, IUST.
Director of the B.Sc. projects office (1989-1993), School of Mechanical Engineering, IUST.
Professor Since May 2007, School of Mechanical Engineering, IUST.
Associate professor 2003-2007, School of Mechanical Engineering, IUST.
Assistant professor 1999-2003, School of Mechanical Engineering, IUST.
Served as Reviewer for International Journals:
Engineering Fracture Mechanics,
International Journal of Fracture,
Theoretical and Applied Fracture Mechanics
International Journal of Solids and Structures,
International Journal of Pressure Vessels and Piping,
International Journal of Rock Mechanics and Mining Science,
International Journal of Damage Mechanics,
Materials and Design,
Structural Engineering and Mechanics,
Meccanica,
Experimental Mechanics,
European Journal of Mechanics- A. Solids,
Rock Mechanics and Rock Engineering,
Engineering Geology
Computational Materials Science,
ASME-Journal of Applied Mechanics,
ASCE-Journal of Engineering Mechanics,
Mechanics of Advanced Materials and Structures,
Proceedings of IMechE-Part C Journal of Mechanical Engineering Science,
Journal of Nanomaterials,
Carbon,
Materials Science and Engineering-A,
Express Polymer Letters,
International Journal of Fatigue.
International Journal of Applied Ceramic Technology.
Ceramics International
Composites Part B
Journal of Composite Materials
International Journal of Mechanical Sciences
Journal of Mechanical Science and Technology
Advances in Mechanical Engineering
International Journal of Adhesion and Adhesives
Computers and Concrete
Scientia Iranica
Multidiscipline Modeling in Materials and Structures
Nanoscale Research Letters
Polymer Composites
Polymer Testing
Served as Reviewer for National Journals: Iranian Journal of Science and Technology, ISME Journal, IUST International Journal of Engineering Science, Modarres Journal, Amirkabir Journal, Mechanical and Aerospace Journal of Engineering, JAST, Ferdowsi University, Esteghlal Journal.
همکاری های بین المللی
Editorial board member: International Journal of Pressure Vessels and Piping (since June 2012)
Editorial board member: Structural Engineering and Mechanics (Since February 2013)
Editorial board member: Theoretical and Applied Fracture Mechanics (Since December 2013)
Editorial board member: International Journal of Rock Mechanics and Mining Science (Since May 2016)
Guest co-editor: Advances in Materials Science and Engineering, Special issue "Brittle or Quasi-Brittle Fracture of Engineering Materials", 2014.
Member of ISRM committee for development of standard for fracture toughness testing by SCB specimen, (by invitation), 2011-2012.
Iran representative in the Asian Society of Experimental Mechanics (ASEM)
Research collaboration with University of Bristol, UK.
Research collaboration with University of Padua, Italy.
Research collaboration with Politecnico di Milano, Italy.
Research collaboration with University of Malaya (UM), Malaysia.
Research collaboration with Technical University of Graz (TUGraz), Austria.
Research collaboration with Universiti Teknologi Malaysia (UTM)
راهنمایی پایان نامه های تحصیلات تکمیلی
دانشجویان دکترا
Zakeri, M., “Photoelastic analysis of cracks under mode I, mode II and mixed mode loading” (PhD), 2008.
Aliha, M.R.M., “Mixed mode fracture in rock materials” (PhD), 2009.
Torabi, A.R. "Brittle fracture in U and V-notched components" (PhD), 2009.
Shadlou, S. “Fracture behavior of epoxy-based nanocomposites reinforced by MWCNTs”, (PhD) 2011.
Akbardoost, J. “Geometry and size effects on mixed mode fracture in quasi-brittle materials”, (PhD) 2012.
Pirmohammad S., “Experimental investigation of brittle fracture in hot mixed asphalt at low temperatures”,(PhD) 2013.
Chamani H.R. (PhD student), Expected year of graduation 2014.
Sabouri, B. (PhD student), Expected year of graduation 2015.
Mahdavi, E. (PhD student), Expected year of graduation 2015.
Karimzadeh, A (PhD student), Expected year of graduation 2016.
Akhavan Saffar, H. (PhD student), Expected year of graduation 2016.
Rashidi Moghaddam, M. (PhD student), Expected year of graduation 2017.
دانشجویان کارشناسی ارشد
بیش از 55 دانش آموخته تا پایان سال 1392
مقالات ژورنال
196. Chamani, H.R., Ayatollahi, M.R. (2016) The effect of Berkovich tip orientations on friction coefficient in nanoscratch testing of metals, Tribology International, Vol. 103, PP. 25-36.
195. Hou; Y., Sun; W., Huang; Y., Ayatollahi, M.R., Wang; L., Zhang, J. (2016) A Diffuse Interface Model to Investigate the Asphalt Concrete Cracking Subjected to Shear Loading at Low Temperature, ASCE Journal of Cold Regions Engineering, Article in press.
194. Berto, F., Ayatollahi, M.R., Borsato, T., Ferro, P. (2016) Local strain energy density to predict size-dependent brittle fracture of cracked specimens under mixed mode loading, Theoretical and Applied Fracture Mechanics, Article in press.
193. Salimi Bani, M., Asgharzadeh Shirazi, H., Ayatollahi, M.R., Asnafi, A. (2016) A New Model for the Artificial Aorta Blood Vessels Using Double-sided Radial Functionally Graded Biomaterials, Medical and Biological Engineering and Computing, Article in press.
192. Khoramishad, H; Akhavan Safar, A.R; Ayatollahi, M. R.; da Silva, L. (2016) Predicting static strength in adhesively bonded single lap joints using a critical distance based method: Substrate thickness and overlap length effects, Journal of Materials: Design and Applications, Article in press.
191. Torabi, A.R., Bahrami, B., Ayatollahi, M.R. (2016) Mixed mode І/ІІ brittle fracture in V-notched Brazilian disk specimens under negative mode І conditions, Physical Mesomechanics, Vol. 19(3), PP. 9-24.
190. Berto, F., Campagnolo, A., Ayatollahi, M.R. and Barnoush, A., (2016) Fracture assessment of graphite components weakened by rounded V-notches and subjected to static multiaxial loading. Procedia Structural Integrity, Vol. 2, PP.1805-1812.
189. Ayatollahi, M.R., Rashidi Moghaddam, M., Razavi, S.M.J., Berto, F. (2016) Geometry effects on crack path and fracture load in PMMA specimens, Engineering Fracture Mechanics, Vol. 163(9), PP. 449-461.
188. Ayatollahi, M.R., Nemati Giv, A., Razavi, S.M.J., Khoramishad, H. (2016) Mechanical properties of adhesively single lap bonded joints reinforced with multi -walled carbon nanotubes and silica nanoparticles, The Journal of Adhesion, Article in press.
187. Karimzadeh, A., Ayatollahi, M.R., Bushroa, A. (2016), Effect of dental restorative material type and shade on characteristics of two-layer dental composite systems Latin American Journal of Solids and Structures, Vol 13 (10), PP. 1851-1865.
186. Chamani, H.R., Ayatollahi, M.R. (2016) Equivalent cone apex angle of Berkovich indenter in face-forward and edge-forward nanoscratch, Wear, Vol. 356-357, PP. 53-65.
185. Ayatollahi, M.R., Akbardoost, J, Berto, F. (2016) Size effects on mixed-mode fracture behavior of polygranular graphite, Carbon, Vol. 103, PP. 394-403.
184. Ayatollahi, M.R., Heydari-Meybodi, M., Dehghany, M., Berto, F. (2016) A new criterion for rupture assessment of rubber-like materials under mode-I crack loading: The effective stretch criterion, Advanced Engineering Materials, Article in press
183. Ayatollahi, M.R. Torabi, A.R., Rahimi, A.S. (2016) Brittle fracture assessment of engineering components in the presence of notches: A review, Fatigue and Fracture of Engineering Materials and Structures, Vol 39, 267-291.
182. 2Berto, F., A. Ayatollahi, M.R. , Campagnolo (2016) Fracture tests under mixed mode I/III loading: an assessment based on the local energy, International Journal of Damage Mechanics, Article in press.
181. Ayatollahi, M.R., Mahdavi, E., Alborzi, M.J., Obara Y., (2016) Stress intensity factors of semi-circular bend specimens with straight-through and chevron notches, Rock Mechanics and Rock Engineering, Vol. 49, No 4, PP. 1161-1172.
180. Asgharzadeh Shirazi, H., Ayatollahi, M.R., Beigzadeh (2016) Preparation and characterization of hydroxyapatite derived from natural bovine bone and PMMA/BHA composite for biomedical applications, Materials Technology: Advanced Performance Materials, Vol. 31(8), PP. 448-453.
179. Pirmohammad S., Khoramishad, H., Ayatollahi M.R. (2016) Effects of asphalt concrete characteristics on cohesive zone model parameters of hot mix asphalt mixtures, Canadian Journal of Civil Engineering, Vol. 43, PP. 226-232.
178. Ayatollahi, M.R., Torabi, A.R., Bahrami, B. (2016) On the necessity of using critical distance model in mixed mode brittle fracture prediction of V-notched Brazilian disk specimens under negative mode І conditions, Theoretical and Applied Fracture Mechanics, Vol. 84, PP. 38-48.
177. Ayatollahi M. R., Ch. Darabi, A., Chamani, H.R., Kadkhodapour, J. (2016) 3D micromechanical modeling of failure and damage evolution in dual phase steel based on a real 2D microstructure, Acta Mechanica Solida Sinica, Vol. 29, No 1, PP. 95-110(Hot paper)
61. Ayatollahi, M.R., Sedighiani, K. (2010) “Crack Tip Plastic Zone under Mode I, Mode II and Mixed Mode (I+II) Conditions” Structural Engineering and Mechanics, Vol 36, No. 5, PP. 575-598.
60. Ayatollahi, M.R., Hashemi, R., Rokhi, H. (2010) "New formulation for vibration analysis of Timoshenko beam with double-sided cracks" Structural Engineering and Mechanics, Vol. 34, No 4, PP. 475-490.
59. Ayatollahi M.R., Torabi A.R. (2010) "Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen" International Journal of Solids and Structures, Vol. 47, PP. 454-465.
58. Aliha, M.R.M., Ayatollahi, M.R. (2010) "Geometry effects on fracture behaviour of polymethyl methacrylate" Materials Science and Engineering-A, Vol. 527, PP. 526-530.
57. Ayatollahi M.R., Torabi A.R. (2010) "Brittle fracture in rounded-tip V-shaped notches" Materials and Design, Vol. 31, PP. 60-67
56. Khoramishad, H., Ayatollahi, M.R. (2009) "Finite element analysis of a semi-elliptical external crack in a buried pipe" Transactions of the Canadian Society for Mechanical Engineering, Vol. 33, PP. 399-409.
55. Aliha, M.R.M., Ayatollahi, M.R., Kharazi, B. (2009) "Mode II brittle fracture assessment using ASFPB specimen" International Journal of Fracture, Vol. 159, PP. 241-246.
54. Aliha, M.R.M., Ayatollahi, M.R. (2009) “Brittle Fracture Evaluation of a Fine Grain Cement Mortar in combined tensile-shear deformation” Fatigue and Fracture of Engineering Materials and Structures, Vol. 32, PP. 987-994.
53. Ayatollahi M.R., Torabi A.R. (2009) "A criterion for brittle fracture in U-notched components under mixed mode loading" Engineering Fracture Mechanics, Vol. 76, PP. 1883-1896.
52. Ayatollahi M.R., Torabi A.R. (2009) Investigation of Fracture in V-notched Brittle Polymers under Pure Shear Loading, Iranian Journal of Polymer Science and Technology, Vol. 22, PP. 63-73.
51. Ayatollahi, M.R. and Bagherifard S., (2009) "Numerical analysis of an improved DCDC specimen for investigating mixed mode fracture in ceramic materials", Computational Materials Science, Vol. 46, PP. 180-185.
50. Ayatollahi, M.R., Aliha, M.R.M., (2009) “Analysis of a new specimen for mixed mode fracture tests on brittle materials” Engineering Fracture Mechanics, Vol. 76, PP. 1563-1573.
49. Ayatollahi, M.R. and Arian Nik, M. (2009) “Edge distance effects on residual stress distribution around a cold expanded hole in Al 2024 alloy” Computational Materials Science, Vol. 45, PP. 1134-1141.
48. Ayatollahi, M.R., Aliha, M.R.M.(2009) "Mixed-Mode Fracture in Soda-Lime glass Analyzed by Using the Generalized MTS Criterion" International Journal of Solids and Structures, Vol. 46, PP. 311-321.
47. Ayatollahi, M.R. and Mousavi, M.M.S. (2008) "Confining pressure effects on mode I and mode II stress intensity factors of cracked rocks" Iranian Journal of Mining Engineering, Vol. 3, No 5, PP. 21-32.
46. Aliha, M.R.M., Ayatollahi, M.R, Pakzad, R. (2008) "Brittle fracture analysis using a ring shape specimen containing two angled cracks" International Journal of Fracture, Vol. 153 (1), PP. 63-68.
45. Aliha, M.R.M., Ayatollahi, M.R, Mousavi, M.M.S. (2008) "Confining pressure effects on stress intensity factors: A 3D finite element analysis" Revue Synthese, Vol. 19, PP. 33-39.
44. Ayatollahi, M.R. and Aliha, M.R.M. (2008) "On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials", Engineering Fracture Mechanics, Vol. 75, PP. 4631-4641.
43. Ayatollahi, M.R. and Aliha, M.R.M. (2008) "Mixed mode fracture analysis of polycrystalline graphite - A modified MTS criterion", Carbon, Vol. 46(10), PP. 1302-1308. (IF,2012: 5.868)
42. Aliha, M.R.M. and Ayatollahi M.R. (2008) " On mixed mode I/II crack growth in dental resin materials" Scripta Materialia, Vol. 59, PP. 258-261.
41. Ayatollahi, M.R. and Bagherifard, S. (2008) "Brittle fracture analysis of the offset-crack DCDC specimen" Structural Engineering and Mechanics, Vol. 29, No. 3, PP. 301-310.
40. Aliha, M.R.M. and Ayatollahi M.R. (2008) " Fracture toughness evaluation for brittle polymers under combined tensile-shear loads" Iranian Journal of Polymer Science and Technology, Vol. 21, No 2, PP. 107-117.
39. Ayatollahi, M.R., Rokhi , H. and Hashemi, R. (2008) "Free vibration of beam with double-sided edge cracks" International Journal of Science and Technology (Amirkabir), Vol. 18, PP. 51-48.
38. Ayatollahi M.R. and Aliha M.R.M. and Rahmanian S. (2007) "Finite element analysis of an improved center crack specimen", Key Engineering Materials, Vol. 347, PP. 441-446.
37. Khojeh, A., Ayatollahi, M.R. and Ahmadian H. (2007) "Vibrational analysis of cracked beams using a special crack element" IUST International Journal of Engineering Science, Vol.18, No 1, PP. 11-18. (in Persian)
36. Guagliano M., Ayatollahi M.R., Zakeri M. and Colombo C. (2007) "Experimental investigation of T-stress effects on photoelastic fringes in Brazilian disk under mode II conditions" Key Engineering Materials, Vol 348, PP. 969-972.
35. Zakeri, M., Ayatollahi, M.R. and Nikoobin, A. (2007) “Photoelastic Study of a Center-Cracked Plate - The Lateral Load Effects”, Computational Materials Science, Vol. 41(2), 168-176.
34. Ayatollahi, M.R., and Zakeri, M. (2007) "T-Stress Effects on Isochromatic Fringe Patterns in Mode II", International Journal of Fracture, Vol.143, PP. 189-194.
33. Ayatollahi, M.R., and Aliha, M.R.M. (2007) “Fracture toughness study for a brittle rock subjected to mixed mode I/II loading”, International Journal of Rock Mechanics and Mining Science, Volume 44, No 4, PP. 617-624.
32. Ayatollahi M.R. and Hashemi, R. (2007) "Mixed mode fracture in an inclined center crack repaired by composite patching, Composite Structures, Vol. 81, PP. 264-273.
31. Ayatollahi M.R. and Hashemi R. (2007) “Computation of stress intensity factors (KI, KII) and T-stress for cracks reinforced by composite patching” Composite Structures, Vol. 78, PP. 602-609.
30. Ayatollahi M.R. and Mostafavi M. (2007) “Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading” Computational Materials Science, Vol. 38, No. 4, PP. 847-856.
29. Ayatollahi M.R. and Aliha M.R.M. (2007) “Wide Range Data for Crack Tip Parameters in Two Disc-Type Specimens under Mixed Mode Loading” Computational Materials Science, Vol. 38, No. 4, PP. 660-670.
28. Hashemi, R. and Ayatollahi M.R. (2006) “The effect of hygrothermal composite patch on fracture strength of a reinforced crack” Applied Mechanics and Materials, Vol. 5-6, PP. 189-196.
27. Aliha M.R.M. , Ashtari, R. and Ayatollahi M.R. (2006) “Mode I and Mode II fracture toughness testing for a coarse grain marble” Applied Mechanics and Materials, Vol. 5-6, PP. 181-188.
26. Smith, D.J., Ayatollahi, M. R. and Pavier, M.J. (2006) “On the Consequences of T-stress in Elastic Brittle Fracture”, Proceedings of the Royal Society A, Vol. 462, PP. 2415-2437.
25. Ayatollahi M.R. and Mostafavi M. (2006) “Effects of Crack Tip Blunting and Residual Stress on a Warm Pre-Stressed Crack Specimen” Computational Materials Science, Vol. 37, PP. 393-400.
24. Ayatollahi, M.R. and Aliniaziazi, A. (2006) "Effects of lateral load on warm prestressing in a center crack plate, Materials Science and Engineering – A, Vol. 441, PP. 170-175.
23. Ayatollahi M.R., Aliha M.R.M. and Hassani M.M. (2006) “Mixed mode brittle fracture in PMMA - An experimental study using SCB specimen” Materials Science and Engineering – A, Vol. 417, PP. 348-356.
22. Ayatollahi, M.R., and Aliha, M.R.M. (2006) “On Determination of Mode II Fracture Toughness using Semi-circular Bend Specimen”, International Journal of Solids and Structures, Vol. 43, PP. 5217-5227.
21. Ayatollahi, M.R., Asadkarami, A. and Zakeri, M. (2005) “Finite element evaluation of punch-type crack specimens” International Journal of Pressure Vessels and Piping, Vol. 82, PP. 722-728
20. Ayatollahi, M.R., and Aliha, M.R.M. (2005) “Cracked Brazilian disc specimen subjected to mode II deformation” Engineering Fracture Mechanics, Vol. 72, PP. 493-503.
19. Asadkarami, A. and Ayatollahi, M.R. (2005) “E-shape specimen for determining fracture toughness in shear loading” IUST International Journal of Engineering Science, Vol. 16, No 4, PP. 11-20.
18. Ayatollahi, M.R. and Zanbilbaf, A. (2005) “Path of crack growth under pure shear”, IUST International Journal of Engineering Science, Vol. 16, No 2, 75-83.
17. Ayatollahi, M.R., Faritus, M.R. and Asadkarami, A. (2004) “Three-dimensional stress analysis of two standard crack specimens” IUST International Journal of Engineering Science, Vol. 15, No. 4, PP. 97-102.
16. Ayatollahi, M.R., Smith, D.J. and Pavier, M.J. (2004) “Effect of constraint on the initiation of ductile fracture in shear loading” Key Engineering Materials, Vol. 261, PP. 183-188.
15. Ayatollahi, M.R., and Aliha, M.R.M. (2004) “Fracture Parameters for Cracked Semi-circular Specimen”, International Journal of Rock Mechanics and Mining Science, Vol. 41, Supplement 1, PP. 20-25.
14. Ayatollahi, M.R., Abbasi, H. (2003) “Crack growth prediction based on the maximum hoop strain criterion- Plane stress”, IUST International Journal of Engineering Science, Vol. 14, No. 4, PP. 123-13
13. Ayatollahi, M.R. and Safari, G.H. (2003) “Evaluation of crack tip constraint using photoelasticity”, International Journal of Pressure Vessels and Piping, Vol. 80, No. 9, PP. 665-670.
12. Ayatollahi, M.R., Pavier, M.J. and Smith, D.J. (2002) "Mode I cracks subjected to large T-stresses", International Journal of Fracture, Vol. 117, No 2, PP. 159-174.
11. Ayatollahi, M.R., Mohammad-Aliha, M.R., Aliniaziazi, A. (2002) “Variation of nonsingular stress parameter in terms of crack length”, IUST International Journal of Engineering Science, Vol 13, No 3, PP 173-186.
10. Ayatollahi, M.R., Smith, D.J. and Pavier, M.J. (2002) “Crack tip constraint in mode II deformation” International Journal of Fracture, Vol. 113, No 2, PP 153-173.
9. Ayatollahi, M.R. and Abbasi, H. (2001) “Prediction of fracture using a strain based mechanism of crack growth” Building Research Journal, Vol. 49, No 3, PP 167-180.
8. Ayatollahi, M.R., Smith, D.J. and Pavier M.J. (2001) “Effect of higher order stresses in an internal crack problem” IUST International Journal of Engineering Science, Vol. 12, No 2, PP 53-66.
7. Ayatollahi, M.R. (2001) “On biaxially loaded internal cracks” International Journal of Fracture, Vol. 109, PP. L9-L14.
6. Smith, D.J., Ayatollahi, M. R. and Pavier, M.J.(2001) “The role of T-stress in brittle fracture for linear elastic materials under mixed mode loading”, Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, No 2, PP 137-150.
5. Ayatollahi, M.R., Pavier, M.J. and Smith, D.J. (1998) "Determination of T-stress from finite element analysis for mode I and mixed mode I/II loading", International Journal of Fracture, Vol. 91, PP 283-298.
4. Smith D.J., Ayatollahi, M.R., Davenport, J.C.W. and Swankie, T.D. (1998) "Mixed mode brittle and ductile fracture of a high strength rotor steel at room temperature", International Journal of Fracture, Vol. 94, PP 235-250.
3. Ayatollahi, M.R., Smith D.J. and Pavier, M.J. (1998) "A method for calculating T-stress for mixed mode problems", International Journal of Key Engineering Materials, Vol. 145, PP 83-88.
2. Ayatollahi, M.R., Pavier, M.J. and Smith, D.J. (1996) "On mixed mode loading of a single edge notched specimen", International Journal of Fracture, Vol. 82, PP R61-R66.
1. Eslami, M.R. and Ayatollahi, M.R., (1993) "Modal Analysis of Shell of Revolution on Elastic Foundation ", International Journal of Pressure Vessels and Piping, Vol. 56, PP 351-368.
آزمایشگاه تحقیقاتی
آزمایشگاه تحقیقاتی خستگی و شکست
ارائه دروس
Strength of Materials I (Undergraduate)
Advanced Numerical Methods (Graduate)
Engineering Mechanics - Statics (Undergraduate)
Computer Aided Machine Design (Undergraduate) Structural Integrity (Undergraduate)
Strength of Materials Lab. (Undergraduate)
Finite Element Methods (Graduate)
Fracture Mechanics (Graduate)
